Filter
Top Products
Transmission Features
83
2
Note
❒
Set the document within 60 sec-
onds. If time runs out, an error
will occur and transmission will
not take place.
H Press the
{
Start
}
key.
Label Insertion
With this feature you can have the re-
ceiver's name printed on the message
when it is received at the other end.
The name will be printed at the top of
the page and will be preceded by
“To”.
Limitation
❒
If you select Label Insertion, the la-
bel might be printed over a portion
of the image when received at the
other end.
Auto Document
You can send an Auto Document
along with another document, or just
send it on its own.
Limitation
❒
Although you can specify scan set-
tings when sending an Auto Docu-
ment, these settings will only
apply to the document you send
along with the Auto Document.
The settings used when you
scanned in and stored the Auto
Document will apply to the Auto
Document itself.
Note
❒
If you send another document
with an Auto Document, the Auto
Document is sent first.
❒
To send just an Auto Document,
start the following procedure from
step
B
.
A Set the document you wish to
send along with the Auto Docu-
ment, and adjust scan settings as
necessary.
B Specify the Auto Document to
send in one of the following
ways:
• Press the Quick Dial it is stored
in.
• Press the
{
Speed Dial
}
key and
enter the code of the Speed Dial
it is stored in.
C Press
[
Yes
]
.
D Dial the destination fax number.
E Press the
{
Start
}
key.
TTI/CIL Print
When you send using G3, your TTI is
printed on faxes when received at the
other end. When sending using G4,
the CIL is printed on faxes at the other
end.