Filter
Top Products
Sending a Fax Message
50
2
Transmission stores the document
in memory, then dials the destina-
tion. Parallel Memory Transmis-
sion allows you to quickly
determine whether a connection
was made. In addition, this func-
tion scans the document faster
than Immediate Transmission and
is useful when you are in a hurry
and need to use the document for
another purpose.
Note
❒
By default this feature is turned
on. You can change this with the
User Parameters.
⇒
P.236
“Changing the User Parameters”
Limitation
❒
Standard Memory Transmis-
sion is used instead of Parallel
Memory Transmission in the
following cases:
• When the line is busy and
could not be connected to
• With Send Later
• With Transfer Request
• With Duplex Original
• When you store a document
for Memory Transmission
while another communica-
tion is in progress
• When two or more destina-
tions are specified
• When you send just an Auto
Document
• With Image Rotation
❒
If you press the
{
Stop
}
key, the
document jams, or memory be-
comes full during Parallel
Memory Transmission, the ma-
chine stops transmitting and
prints the Communication Re-
sult Report (Memory Transmis-
sion). The file is erased.
❒
Total stored page numbers are
not printed with Parallel Memo-
ry Transmission. Only the page
numbers are printed, such as
P.1, P.2 not
1
/
2
,
2
/
2
Note
❒
If you run out of memory, nor-
mal Memory Transmission
takes place. When and if this
happens varies depending on
the various options you have in-
stalled.
File Reserve Report (Memory
Transmission)
This report is printed after a docu-
ment is stored in memory. It helps
you review the contents and regis-
tered destinations of documents
stored for transmission. Even if the
machine is set up not to print this re-
port, it is still printed if a document
could not be stored.
Limitation
❒
This report is not printed for mes-
sages sent using Parallel Memory
Transmission.
Note
❒
You can turn this report on and off.
By default it is not printed.
⇒
P.236
“Changing the User Parameters”
❒
You can choose whether to include
part of the document image on the
report (part of the image is printed
by default).
⇒
P.236
“Changing the
User Parameters”
Communication Result Report
(Memory Transmission)
This report is printed when a Memo-
ry Transmission is completed so you