Filter
Top Products
Sending a Fax Message
66
2
❖
G3 Line Selection
G4 communication always uses IS-
DN, but G3 communication can
use either PSTN or ISDN. There-
fore, when connected to both
PSTN and ISDN and selecting G3,
you can choose which line to use.
Note
❒
When using G3 with ISDN, you
can use the sub-address and
UUI.
❖
Auto Discriminate
This function is for when G4 is se-
lected. The machine first dials us-
ing G4, but if the destination is
PSTN, it switches automatically to
G3.
Limitation
❒
This function requires the op-
tional G4 Unit.
Note
❒
When the destination G3 uses
TA (Terminal Identification) or
is attached to a PABX, and con-
nected to ISDN, it is detected as
G4 and the machine does not
switch to G3.
❖
When you have stored the Line Select
function in a User Function key
When the optional G3 Unit or op-
tional G4 Unit is installed, you can
store the Line Select function in
one of the User Function keys
(
{
F1
}
-
{
F5
}
).
When sending a fax, pressing the
User Function key enables you to
select the line.
How to Select the Line
Preparation
Store the Line Select function in a
User Function key (
{
F1
}
-
{
F5
}
).
⇒
P.211
“Assigning User Function
Keys”
A Make sure that the G3 indicator is
lit.
B Press the User Function key
(
{
F1
}
-
{
F5
}
) with the Line Select
function stored in it.
C Press the 0 1 keys to select the
line.
D Press
[
OK
]
.