Filter
Top Products
On-Hook Dial
59
2
On-Hook Dial
This is just like using a connected op-
tional handset or external telephone,
except you do not have to pick up the
handset before dialing. Just press the
{
On Hook Dial
}
key and dial the num-
ber. If you hear a voice, you can pick
up the external telephone and speak
with the other party.
Limitation
❒
This feature is not available in
some countries.
❒
You cannot use this feature with
the optional G3 unit.
Note
❒
You can dial with the number
keys, Quick Dials or Speed Dials.
Reference
P.231
“Monitor Volume”
A Set your document and select any
scan settings you require.
Reference
P.35
“How to Set a Document”
P.62
“Scan Settings”
B Press the
{
On Hook Dial
}
key.
You will hear a low tone from the
internal speaker. If you wish to
cancel this operation, press the
{
On
Hook Dial
}
key again.
C Dial.
The machine dials each digit as
you enter it. If you make a mistake,
press the
{
Stop
}
key,
{
On Hook Dial
}
or
{
Clear Modes/Energy Saver
}
key
and return to step
B
.
D When a connection is made to an-
other fax machine (you will hear a
high-pitched tone), press the
{
Start
}
key.
• If you hear a voice, pick up the
external handset before you
press the
{
Start
}
key and notify
the destination that you want to
send a fax message (ask them to
switch to Fax mode).
• After transmission the machine
will return to standby mode.
Note
❒
If you wish to cancel transmis-
sion while it is in progress, press
the
{
Stop
}
key then remove the
document.
Using On Hook Dial with ISDN
This feature requires the optional G4
Unit.