Filter
Top Products
Setup
23
1
The CSI (Called Station Identifica-
tion) is passed to the other party
when you send or receive a fax.
When the CSI is received, it is
shown on the display or printed on
reports on the receiver's or send-
er's machine. The CSI works even
if the receiver or sender uses a dif-
ferent make machine. The CSI can
be up to 20 characters long and
contain a plus sign (+), numbers
and spaces. Register your country
code, area code (minus the leading
zero) and your fax number in that
order.
•PSTN Line Type
Select whether the connected line
uses tone or pulse dialing.
• PSTN Access Number
Use this setting to save having to
enter a pause after the PSTN Ac-
cess Number when dialing. For ex-
ample, if you register “0” as the
PSTN Access Number, a pause
will be inserted automatically after
the “0” when dialing.
Note
❒
The CSI feature is not available in
some countries.
A Make sure that the machine is in
standby mode.
Note
❒
If the “Fax Features” or “Key
Op. Tools” screen is shown,
press the
{
User Tools
}
key. If any
other display is shown, press
the
{
Clear Modes/Energy Saver
}
key.
B Press the
{
User Tools
}
key.
C Enter the code for “Key Op.
Tools” with the number keys.
Then press the
{
#
}
key.
The “Fax Features” menu appears.
D Enter the code for “System Set-
tings” with the number keys.
E Enter the code for “G3-1 Analog
Line” using the number keys.
F Enter the code for “PSTN Line
Type” using the number keys.