Filter
Top Products
Transmission Features
85
2
❒
Specify the scan area with the Pro-
gram Scan Area setting.
⇒
P.286
“Program Scan Area”
❒
When the machine is shipped, this
feature is turned off by default. To
turn it on, adjust the User Parame-
ters.
⇒
P.236
“Changing the User Pa-
rameters”
Backup File Transmission
When turned on, this feature sends a
backup copy of all faxes you send to a
destination that you can specify.
Preparation
You must specify the backup desti-
nation beforehand.
⇒
P.284
“Back-
up File Transmission Settings”
Limitation
❒
This function works with the fol-
lowing features:
• Memory Transmission
• Transfer Request Transmission
• Confidential Transmission
• SUB Code Transmission
• Mail Transmission (optional
NIC FAX Kit required)
JBIG Transmission
Optional JBIG Unit required.
If you use JBIG (Joint Bi-level Image
Experts Group) compression you can
send photographic documents at
high speed.
Normally, the JBIG method is used
when sending to other fax machines.
However, if connected to multiple
lines and another JBIG transmission
is in progress, transmission takes
place without using JBIG.
Limitation
❒
This feature requires that the other
party's fax machine has both the
JBIG function and ECM function
(G3 communication only).
❒
When connected to multiple lines
and a JBIG transmission is in
progress, JBIG transmission is not
possible until that transmission
has finished.
Note
❒
You can have the JBIG transmis-
sion feature selected when you
press the
{
Halftone
}
key. Contact
your service representative for de-
tails.