Filter
Top Products
Getting Started
40
1
to match the new paper size.
Note
❒
The front fence might be fixed
by screw.
F Make sure that the front fence is
aligned with the size line on the
base of the paper tray.
G Remove the two green screws on
the rear fence as shown.
H While holding in the green re-
lease laver, align the rear fence to
the new paper size.
I Check that the rear fence is set in
the correct position.
Make sure that the holes in the
base of the paper tray are properly
aligned with the holes in the rear
fence.
J Fix the rear fence with the two
screws you removed in step G.
K While squeezing in the sides of