Open as PDF
Button Manager is a utility software to link scanning functions to the SCANNER key on the unit. This software enables
you to set scanning functions to six different scan menus, which will be linked the SCANNER key on the unit.
Reference: To begin scanning using the unit's operation panel, settings must be established in the Control Panel after the Button Manager is
installed. For information on installing the Button Manager, establishing the Control Panel settings, and scanning using the unit's
operation panel, see "USING THE SCANNER MODE" in the Operation Manual.
The functions of Button Manager are shown below.
You can specify and change your six scan menu options from six functions. Refer to Button Manager Settings
and change the scan menu options.
Click to set scan menu
"Application Selection" area
Select the start-up application here.
Click this button to display the help file
for Button Manager.
Click to save your settings without
closing the dialog box.
Click this button to exit
the dialog box without
making any changes to
Click to save your
settings, and exit the
Some applications may limit
your choice of settings.
"Scan Setup" area
Set the scan conditions.
Close the source application before using the SCANNER key on
Outline of Button Manager