Sharp AR-157E All in One Printer User Manual

Close the front cover and
then the side cover by
pressing the round
projections near the side
cover open button. The
indicator will go out and the
start ( ) indicator will light
When closing the covers,
be sure to close the front
cover securely and then
close the side cover. If the
covers are closed in the
wrong order, the covers
may be damaged.
Even after a new toner cartridge is installed, the start ( ) indicator
may not light up, indicating copying cannot be restarted (toner is not
sufficiently fed). In this case, open and close the side cover. The
copier will feed toner again approximately 2 minutes and then
copying can be restarted.