Sharp AR-157E All in One Printer User Manual


 
4
This chapter provides basic information for using the unit.
USING THE MANUAL
The operation manual contains explanations of how to operate the unit, important
considerations, and maintenance procedures. To get the most out of the unit, please
read the operation manual. Please keep the operation manuals in a suitable location
that will allow for convenient future reference.
Conventions used in the manual
This operation manual explains the operation of the AR-153E and AR-157E models.
In cases where the operation is the same, AR-157E is used.
The differences
between AR-153E and AR-157E are shown below.
This operation manual refers to the Reverse Single Pass Feeder as the "RSPF"
and Single Pass Feeder as the "SPF".
In this manual, the following icons are used to provide the user with information
pertinent to the use of the unit.
Warns the user that injury may result if the contents of the warning are
not properly followed.
Cautions the user that damage to the unit or one of its components
may result if the contents of the caution are not properly followed.
Notes provide information relevant to the unit regarding specifications,
functions, performance, operation and such, that may be useful to the
user.
Indicates a letter displayed in the display.
:Standard functions and equipment
:Optional functions and equipment
AR-153E
Copier
Printer *
1
(AR-PG2)
AR-157E
Copier
Scanner *
1
(AR-PG2)
SPF *
2
(AR-SP5)
250-sheet paper feed unit *
3
(AR-D16)
*
1
Can be used when the optional Printer/Scanner Expansion Kit (AR-PG2) is installed.
*
2
The optional single pass feeder (AR-SP5) can be installed.
*
3
The optional 250-sheet paper feed unit (AR-D16) can be installed.
RSPF
2 trays
Printer *
1
(AR-PG2)
Scanner *
1
(AR-PG2)
1
INTRODUCTION