Filter
Top Products
Printing Lists and Reports
214
Timer List (List 02)
This list shows the timer operations that are currently set.
Destination List (List 03)
This list shows the fax numbers that have been programmed for automatic
dialing.
NOTE One of the following notes will appear under NOTE in the report
to indicate whether the transaction was successful, and if not,
the reason for the failure. (Note: With the exception of the error
codes CE-00 to CE-05 explained on the following page, the
success or failure of a Scan to E-mail transmission is not
indicated. If your e-mail server is unable to deliver a Scan to E-
mail transmission to an e-mail address, notification will be sent to
your specified sender’s e-mail address.)
OK - Transmission/reception was successful.
P.FAI L - A power failure prevented the transaction.
JAM - The printing paper or document jammed, preventing the
transaction.
BUSY - The fax was not sent because the line was busy.
COM.E-0 to COM.E-31 - A telephone line error prevented the
transaction. See Line Error in Problems and Solutions in Chapter
9.
CE-01 to CE-05 - An error occurred when the machine
attempted to establish a connection with your e-mail server (see
page 229 for explanations of the errors).
CANCEL - The transaction was cancelled because the STOP
key was pressed, no document was in the feeder, or the other
machine requested transmission using a function which your
machine does not have.
CANCEL 3 - (Used for confidential transmission only)
A confidential transmission was cancelled because the receiving
machine does not have a confidential function, a confidential
passcode is not programmed in the receiving machine, its
memory is full, or it is not a Sharp model.
CANCEL 4 - (Used for confidential transmission only)
A confidential transmission was cancelled because an incorrect
mailbox number was entered for a machine with confidential
mailboxes, or the other machine’s memory is full.