Filter
Top Products
Entering Your Name and Fax Number
25
1. Installation
Entering Your Name and Fax Number
Before you can begin using the machine, you must program your name and
fax number. Once you program this information, it will appear automatically at
the top of each fax page you send.
Important!
FCC regulations require that your name, telephone/fax number, and the date
and time appear on each fax message you send. Enter your name and fax
number here and set the date and time as explained in the following section to
have the machine include this information automatically at the top of your fax
messages.
Note: If you have installed the dual-line option, use the procedure on page 70
to enter your name and the number of each line.
1 Press and then or
until ENTRY MODE is selected in the
display.
2 Press and then or
until OWN PASSCODE SET is selected.
3 Press .
♦
Note:
On the FO-DC635, perform Steps 6 and 7 first and then Steps 4 and 5.
4 Enter your fax number (max. of 20 digits) by pressing the numeric keys.
• To insert a space between digits, press .
• To clear a mistake, press .
MENU
START/
ENTER
START/
ENTER
STOP
Display:
MENU MODE
1:RECEIVE MODE
2:LISTING MODE
3:ENTRY MODE
ENTRY MODE
01:DESTINATION SETTING
02:PASSCODE SETTING
03:OWN PASSCODE SET
OWN PASSCODE SET
SENDER’S NUMBER