Filter
Top Products
Problems and Solutions
225
10. Trouble-
shooting
The machine is on and
data is received, but the
data is not printed. (The
DATA indicator blinks.)
• Check to see if an error message appears in the
display of the machine.
• Is the specified size of paper loaded in the
machine? Load paper or select another paper size.
The machine cannot be
selected from your
computer.
• Is the printer driver installed correctly? Install the
printer driver correctly.
Incorrect printing
orientation
• Is the orientation setting in the printer driver
correct? Correct the orientation setting in the Paper
tab of the printer driver.
The printed image is
clipped or off the edge of
the paper.
• Was a different paper size used? Select the same
paper size as the document in the Paper tab of the
printer driver, and make sure that correct size of
paper is loaded in the selected source.
• Make sure the orientation setting in the Paper tab
of the printer driver is the same as the orientation of
the original document.
Printing stops in the
middle of a print job.
• Check the display of the machine to see if a
message appears. Correct the problem indicated
by the message.
The paper specified in the
software application is not
used.
• Make sure that the desired paper is set in the paper
tray or cassette of the machine and select "Auto"
for the paper source in the printer driver.