Open as PDF
Wide LCD Monitor
/64 (819.6) (width) x 18-
/64 (460.8) (height), 37-
/64 (940.3) (diagonal))
TFT (thin film transistor) Active Matrix
Number of dots
3,147,264 dots (768 (height) x 1,366 (width) x 3)
NTSC (3.58/4.43MHz), PAL/PAL-60, SECAM
/32 inch (5 cm), 1 piece
External speakers: 20 W (10 W + 10 W) Built-in monitor speaker: 0.8 W
INPUT1 VIDEO in (BNC), S-video in, AUDIO (L/R) in
VIDEO in/out (RCA), AUDIO (L/R) in/out
VIDEO OUTPUT VIDEO out (BNC)
INPUT3 (Y/G, Cb/Pb/B, COMPONENT video in/PC (ANALOG) in (BNC),
Cr/Pr/R, HD, VD) AUDIO in (stereo jack,
INPUT3/PC (ANALOG) OUTPUT (Mini D-Sub 15 pin)
PC(ANALOG)INPUT PC (ANALOG) INPUT in (Mini D-Sub 15 pin),
AUDIO in (stereo jack,
PC(DIGITAL)INPUT PC (DIGITAL) INPUT in (DVI-D)
RS-232C INPUT terminal (9 pins), RS-232C OUTPUT terminal (9 pins),
SPEAKER terminal (L/R), AC input terminal
Standby power consumption
Dimensions inch (mm)
/64 x 3-
/32 x 22-
/64 (949 x 99.5 x 572)
Weight lbs. (kg)
41.9 (19) (without stand)
Operating temperature 0°C – +40°C
Operating humidity 20% – +80%
■ As a part of policy of continuous improvement, SHARP reserves the right to make design and specification
changes for product improvement without prior notice. The performance specification figures indicated are
nominal values of production units. There may be some deviations from these values in individual units.
■ The Liquid Crystal panel is a very high technology product with 3,147,264 thin film transistors, giving you fine
picture details. Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green
or red. Please note that this does not affect the performance of your product.
■ The listed optional accessories are available for the Wide LCD Monitor. Please purchase
them at your nearest shop.
» Additional optional accessories may be available in the near future. When purchasing, please read the
newest catalogue for compatibility and check the availability.
No. Part name Model name
1 Table stand AN-37ST1
2 Wall-mount bracket AN-37AG1
(As of June 2003)
Special techniques are required to mount this monitor, so be sure to rely on a specialist
for mounting work. The customer should never perform any of this work himself or herself.
Our company will bear no responsibility for accidents or injuries caused by improper
mounting or handling.