Sharp MX-2700N Copier User Manual


 
101
8
Press the [COLOUR START] key
( ) or the [BLACK & WHITE
START] key ( ) to scan the back of the
card.
Use the same [START] key that you used for the front side of
the card.
To cancel scanning...
Press the [STOP] key ( ).
9
Touch the [Read-End] key.
Copying will begin.
To cancel copying...
Press the [STOP] key ( ).
The original must be placed on the document glass.
Copying is only possible on standard size paper.
XY Zoom cannot be used when using this function.
The image cannot be rotated when using this function.
To cancel card shot...
Touch the [Cancel] key in the screen of step 6.
System Settings (Administrator): Card Shot Settings
This is used to set the values to which the size returns when the [Size Reset] key is pressed. 25 mm to 210 mm (1" to 8-1/2")
can be entered for both the horizontal and vertical dimensions.
The factory default settings are 86 mm (3-3/8") for X (the width) and 54 mm (2-1/8") for Y (the height).
or
Place next original. Press [Start].
When finished, press [Read-End].
Read-End