![](http://pdfasset.owneriq.net/0/5b/05bfdfe0-208a-44fc-bd70-2a523d13444d/05bfdfe0-208a-44fc-bd70-2a523d13444d-bgd5.png)
9-43
Configuring Advanced Features
Stack Management
Configuring Advanced
Features
Figure 9-36. Example of a Stack Showing Switch Number (SN) Assignments
To access the “North Sea” console, you would then execute the following
telnet
command:
Big_Waters-0(config)# telnet 3
You would then see the CLI prompt for the “North Sea” switch, allowing you
to configure or monitor the switch as if you were directly connected to the
console.
The switch number
(SN) for the “North
Sea” switch is “3”.