![](http://pdfasset.owneriq.net/0/5b/05bfdfe0-208a-44fc-bd70-2a523d13444d/05bfdfe0-208a-44fc-bd70-2a523d13444d-bgd8.png)
9-46
Configuring Advanced Features
Stack Management
Configuring Advanced
Features
■ Stacking uses only the primary VLAN on each switch in a stack.
■ The primary VLAN can be tagged or untagged as needed in the
stacking path from switch to switch.
■ The same VLAN ID (VID) must be assigned to the primary VLAN in
each stacked switch.
Web: Viewing and Configuring Stacking
Figure 9-38. Example of the Web Browser Interface for a Commander
The web browser interface for a Commander appears as shown above. The
interface for Members and Candidates appears the same as for a non-stacking
SMC6624M switch.
To view or configure stacking on the web browser interface:
1. Click on the Configuration tab.
2. Click on [Stacking] to display the stackingconfiguration for an individual
switch, and make any configuration changes you want for that switch.