Filter
Top Products
21
Registering an NSP-1 and Creating Groups
Chapter 3 Setup Required upon Installation
Registering an NSP-1 and
Creating Groups
As the BZNP-D1 software manages an NSP-1 via a
network, the NSP-1 players to be managed should be
registered in advance. If an NSP-1 uses a password for
access management, you should also specify the password
to be sent from the BZNP-D1 software upon accessing the
NSP-1.
And, as the BZNP-D1 software manages playlists and
schedules for the NSP-1 groups and sends data to these
groups, you should also create NSP-1 groups. A single
NSP-1 can be a member of more than one group. Classify
the NSP-1 players into groups according to the contents
they play, and the screen resolution and orientation
(portrait or landscape) of the displays connected to the
respective NSP-1 players.
Although the BZNP-D1LE supports only one NSP-1
player, create a group to specify screen orientation and
resolution, or other group attributes.
1
In the BZNP-D1 main window, select [Setup] >
[Group Setup] from the menu bar.
The Group Setup dialog box is displayed.
2
Register the NSP-1 players used in the system.
2-1 Click [New NSP-1].
The Edit NSP-1 dialog box is displayed.
2-2 In the NSP-1 Name and IP Address text boxes,
enter the name and IP address of an NSP-1.
A password has been set for each NSP-1 player
when it is shipped from the factory. If you
change the password, input an identical
password in the Password and Retype Password
text boxes and click [OK] to avoid miss-typing.
Make sure to use the IP address and password
specified for the NSP-1 hardware. Click [Check
Connection] to test the connection to the
specified IP address and display the result.
2-3 Repeat steps 2-1 and 2-2 to register all the NSP-
1 players you use in the system.
The registered NSP-1 players will appear in the
NSP-1 list box in the Group Setup dialog box.
3
The order of the registered NSP-1 players in the Group
Setup dialog box represents the actual order of the
NSP-1 players when data is sent or when they are
being displayed in the NSP-1 Status window.
Arrange the order of the NSP-1 players as desired
using drag & drop operations.
4
Create NSP-1 groups.
4-1 Click [New Group].
The Edit Group dialog box is displayed.
4-2 Specify the following items and then click [OK].
Group Name: the name of a group you create.
Screen Resolution (WxH): the resolution of the
display used.
When you have selected “Composite” for
“Display” on the NSP-1 System Settings page,
that has been viewed using a web browser, select
Note