Filter
Top Products
68
Detailed Registering and Editing Operations for an NSP-1 or Group
Chapter 5 System Setup
Detailed Registering and
Editing Operations for an
NSP-1 or Group
The section “Registering an NSP-1 and Creating Groups”
on page 21 explains how to register the NSP-1 players and
groups that the BZNP-D1 software manages. This section
explains the detailed setting items and how to modify
NSP-1 and group registrations.
You can register or modify NSP-1 players or groups in the
Group Setup dialog box. To display the dialog box, select
[Setup] > [Group Setup] from the menu bar.
Changing NSP-1 data
Changing the name, IP address, or
password
When an NSP-1 player appears in more than one place in
the Group Setup dialog box, such as the case where it
belongs to multiple groups, you can select any instance of
that player to change its settings.
1
In the Group Setup dialog box, double-click the NSP-
1 player whose data you want to change.
Or, right-click the desired NSP-1 player and select
[Edit NSP-1] on the popup menu.
The Edit NSP-1 dialog box is displayed.
2
Change the desired items.
For details on each item of the Edit NSP-1 dialog box,
see “Setting Items upon NSP-1 Registration” on page
70.
3
If you changed the IP address or password, click
[Check Connection] to check whether communication
between the BZNP-D1 software and the NSP-1 can be
established.
4
Click [OK].
The Edit NSP-1 dialog box is closed.
5
To change the data of another NSP-1 or of a group,
perform the required operations.
To finish operations in the Group Setup dialog box,
click [x] at the top right of the Group Setup dialog box
to close it.
Changing the groups that an NSP-1 player
belongs to
An NSP-1 player can belong to one or more network
groups. Perform either of the following procedures to
assign an NSP-1 player to the desired group or exclude one
from the group:
To assign an NSP-1 player to the desired group
1
Click the desired group in the Group list box of the
Group Setup dialog box.
In the NSP-1 list box, the NSP-1 players belonging to
the selected group are displayed in gray. Players not
belonging to the group are displayed in black.
2
Select the NSP-1 player(s) that you want to assign to
the selected group.
Selected group
Registered NSP-1
in that group
NSP-1 registered in
the selected group
NSP-1 not registered
in the selected group