Filter
Top Products
59
Remote Control of NSP-1 Players
Chapter 4 Routine Operations
Controlling an NSP-1 or a Connected
Device
The BZNP-D1 software enables you to control an NSP-1
player or a device connected to it by using a control
command registered as content in the BZNP-D1 software.
The controls include adjusting output audio level of the
NSP-1 player, turning the power on/off, and switching the
input signal of the plasma display or projector connected to
the NSP-1.
See “Registering Additional Control Commands” on page
33 for details on the operations required to register
control commands.
You can use control commands stored in the BZNP-D1
software or those already stored on the NSP-1 players.
When using a control command stored in the BZNP-D1
software, it is sent to all NSP-1 players in the selected
group simultaneously.
1
Check that the BZNP-D1 (PC) option button is
selected, and select the target group using the Group
drop-down list box.
Or, select the NSP-1 (Remote Control) option button,
select the NSP-1, then click [Update].
2
Select the Control tab of the Content Management
window.
3
Right-click the control command to be sent, then select
[Manual Control] on the popup menu.
If you selected the BZNP-D1 (PC) option button in
step 1, the selected command is sent to all NSP-1
players in the selected group.
If the NSP-1 (Remote Control) option button was
selected, the control command is carried out on the
selected NSP-1.
See “Checking Transfer Status” on page 56 for details on
the operations required to check the transfer status and the
status of the NSP-1 player.
Deleting Materials and Schedules
Stored on an NSP-1
1
In the BZNP-D1 main window, select the NSP-1
(Remote Control) option button, select the NSP-1
player whose data you want to delete using the NSP-1
drop-down list box, then click [Update].
After the Updating Information window is displayed,
the contents stored on the selected NSP-1 are
displayed in the Content Management window.
2
In the Content Management window, select the tab
corresponding to the material or playlist to be deleted.
To delete a playlist, for example, select the Playlist
tab.
3
Select the items to be deleted.
To select more than one item, hold down the Ctrl key
and click the desired items in turn.
To select all the items in a range, hold down the Shift
key and click the first and last items in the range.
4
Right-click the selection, then click [Delete] on the
popup menu.
Or, press the Delete key.
A confirmation message appears.
5
Click [Yes].
The Deleting Data window appears, then the items
stored on the NSP-1 player are deleted.
You can stop the deletion by clicking [Cancel] in the
Deleting Data window, but it is not possible to recover
data that has already been deleted.
The BZNP-D1 software allows you to delete even the
schedules and materials required for playout.
Make sure not to delete items you need for playout.
Note
Note