Filter
Top Products
70
Detailed Registering and Editing Operations for an NSP-1 or Group
Chapter 5 System Setup
Setting Items upon NSP-1
Registration
You can register an NSP-1 player in the Edit NSP-1 dialog
box. To display the Edit NSP-1 dialog box, click [New
NSP-1] in the Group Setup dialog box or double-click an
NSP-1 player that is already registered (or, right-click a
registered NSP-1 and select [Edit NSP-1] on the popup
menu).
The Edit NSP-1 dialog box contains the following setting
items:
NSP-1 Name text box
Enter a name for an NSP-1 player, which should be unique
in the system.
IP Address text box
Enter the IP address for the NSP-1 player, which should be
unique in the system. Make sure to specify the same IP
address as specified on the NSP-1 player.
Password and Retype Password text boxes
Enter the password that the BZNP-D1 software uses in
accessing the NSP-1 player in the Password text box. Enter
the same password in the Retype Password text box to
avoid specifying a mis-typed password.
Password that is identical to the one set to the NSP-1
players upon ex-factory is pre-defined in the both text
boxes. When you change the password on the NSP-1
player(s), specify the same password in these text boxes.
Check Connection button
Used to check communication to the device with the
specified IP address in the IP Address text box, and show
the result.
Note that an incorrect password error will occur if a
password has been set to the NSP-1 player but you have
not specified the identical password.
Changing Group data
Changing name, playout time, sleep time,
screen resolution, and screen orientation
1
In the Group Setup dialog box, double-click the group
whose data you want to change.
Or, right-click the desired group and select [Edit
Group] on the popup menu.
The Edit Group dialog box is displayed.
2
Change the desired items.
For details on each item of the Edit Group dialog box,
see “Setting Items upon Group Registration” on page
71.
3
Click [OK].
The Edit Group dialog box is closed.
4
To change the data of an NSP-1 player or another
group, perform the required operations.
If there is no data that you want to change, click [x] at
the top right of the Group Setup dialog box to close it.
Deleting the group registration
1
In the Group list box of the Group Setup dialog box,
select the group that you want to delete, then click
[Delete Group].
Or, right-click the desired group and then select
[Delete Group] on the popup menu.
A confirmation message appears.
2
Click [Yes].
The registration of the selected group is deleted and
the selected group disappears from the Group list box.
3
To change the data of an NSP-1 player or another
group, perform the required operations.
If there is no data that you want to change, click [x] at
the top right of the Group Setup dialog box to close it.