Filter
Top Products
67
BZNP-D1 System Setup Items
Chapter 5 System Setup
999000 and greater index numbers for each piece of
content are reserved for system use. You cannot enter
999000 or greater number in the text boxes.
Video Format drop-down list box
Select the video system (NTSC or PAL) of the video
material that you want to use. Usually you will select the
video system used in the television system of your country.
Only video material corresponding to the selected video
system is displayed on the Video tab of the Content
Management window.
Base Folder text box
Specify the folder where you want to save the materials,
playlists, and schedules. They are saved in sub folders
created in the specified base folder according to their data
types.
Usually, you need not change the setting. When more than
one computer installed with the BZNP-D1 software uses
materials in a network shared folder, enter the absolute
path, or the relative path from the folder where the BZNP-
D1 software is installed. Or click [Browse] and then select
the desired folder from the folder tree.
When different operators use different computers to create
and register materials, edit playlist and schedules, and send
data respectively, you can make operations much easier by
specifying the appropriate base folder. Any change in data
performed by other operators working with a different
computer, however, will only be checked when the BZNP-
D1 software is started.
• Video, graphics, Flash, and audio materials created
using other application programs are not saved under the
base folder. When they are registered in the BZNP-D1
software, information describing the original file
locations is saved together with their material data such
as data type and titles.
• If you change the base folder after you create materials,
playlists, or schedules, you will no longer be able to use
those materials, playlists, or schedules.
• When more than one computer installed with the BZNP-
D1 software uses materials in a shared folder, if multiple
operators create or edit the material, playlist, or schedule
with an the identical index, the newest one will overwrite
the older ones. To avoid overwriting, specify a different
BZNP-D1 ID on each computer.
Network tab
Prohibit Network Communication Between spin
boxes
Specify the time period (24-hour system) when you want
to prohibit communication with the NSP-1 players.
Usually the same period as the NSP-1 sleep time is
specified, but you can set the hours in the daytime so that
the data will not be sent in the daytime while network
traffic is heavy. However, note that it is not possible to
check and delete contents stored on the NSP-1 players, or
preview content on the NSP-1 player during this time.
If you attempt to send playout schedule data within the
time period specified here, operation of the BZNP-D1
software will be suspended. After the time period has
passed, the BZNP-D1 software automatically sends the
data to NSP-1 players, as you requested.
For example, where you are allowed to send data only
during the night, and 10:00 - 22:00 is specified here, the
BZNP-D1 software waits until 22:00 if you send data at
17:00. As it automatically sends data after 22:00, you are
not required to stay at the office.
However, the BZNP-D1 software only accepts limited
operations while it is suspended. You cannot send data for
more than one group in the time period specified here.
Note
Notes
Hint