Filter
Top Products
5-32
ROUTING SWITCHER SYSTEM (E)
5-2. Setting Items of the Secondary Station
N: SET PANEL TABLE (BKS-R3206/R3216)
Purpose
This menu is used to assign source name and destination
name to be displayed.
Setting Procedure
The setting procedure is the same as that of menu item [N :
SET PANEL TABLE] (BKS-R3204).
m
1. The setting of [SET PANEL TABLE (SOURCE)]
assigns the source name and [SELECT DESTINA-
TION] assigns the destination name.
2. The destination name can also be assigned using the
button on the front panel. Refer to the Operation
Manual for setting.
3. If “Type + number” name mode is selected in the
menu item [Z : SET PANEL STATUS], (refer to the
Operation Manual of BKS-R3206) “SET PANEL
TABLE (SOURCE)” is not displayed.
Example of Setting Screen
SONY ROUTING SYSTEM SETUP MENU BKS-R3206 V3.10 STATION NUMBER 18
SET PANEL TABLE( SOURCE )
01 KEY=IN001 02 KEY=IN002 03 KEY=IN003 04 KEY=IN004
05 KEY=IN005 06 KEY=IN006 07 KEY=SONY007 08 KEY=SONY008
09 KEY=SONY009 10 KEY=SONY010 11 KEY=IN011 12 KEY=IN012
13 KEY=SONY013 14 KEY=SONY014 15 KEY=SONY015 16 KEY=IN016
SELECT DESTINATION
01 OUT001 02 OUT002 03 OUT003 04 OUT004
05 OUT005 06 OUT006 07 OUT007 08 OUT008
09 OUT009 10 OUT010 11 OUT011 12 OUT012
13 OUT013 14 OUT014 15 OUT015 16 OUT016
0=IN 1=OUT 2=SONY 3=VTR 4=SUP 5=CB 6=AIR 7=ME
8=PGM 9=CL A=SL B=L C=RET D=MIX E=JEEP F=OSC
G=L/A H=REM I=CAM J=STDO K=AUX L=COV M=BS N=CS
O=SAT P=CG Q=WETH R=TEST S=HD T=D1- U=D2- V=SEG
Ctrl-E:MENU Ctrl-D:RETURN Ctrl-N:DESCRIP.NAME
4. When “T : TAKE M : MONI” is displayed on the
screen, it means that the button on the source side can
be set as the TAKE button or MONI button.
Before pressing [Enter], select a key from the source
side. To set it as the TAKE button, press [T]; to set it
as the MONITOR button, press [M].
5. When “V : VTR” is displayed on the screen, it means
that the VTR control function can be assigned to the
buttons on the source side.
Before pressing [Enter], select a key from the source
side and press [V].
Enter the number according to the list of operations on
the bottom of the screen.
6. When “E : LEVEL” is displayed on the screen, it
means that the level control function can be assigned
to the buttons on the source side.
Before pressing [Enter], select a key from the source
side and press [E].
Enter the number according to the list of levels on the
bottom of the screen.
n
In BKS-R1607 of version V1.10 and higher, any desired
button among the sixteen buttons can be set as a TAKE
button.
When this setting is performed, the name selected by the
SELECTOR knob on the front panel can be taken by
pressing the TAKE button.
(Maximum inputs 512 x outputs 512)
The actual setting procedure is as follows. Select a key
from the source side which you want to use as the TAKE
button. Press the [T] button.
Example of Setting Screen
SONY ROUTING SYSTEM SETUP MENU BKS-R1607 V1.10 STATION NUMBER 12
SET PANEL TABLE(SOURCE) CONTROL DESTINATION = OUT244
01 KEY=SRC004 02 KEY=SRC005 03 KEY=SRC006 04 KEY=SRC001
05 KEY=SRC002 06 KEY=SRC003 07 KEY=SRC007 08 KEY=SRC008
09 KEY=SRC009 10 KEY=SRC010 11 KEY=SRC013 12 KEY=SRC014
13 KEY=....... 14 KEY=....... 15 KEY=....... 16 KEY=TAKE
SET PANEL TABLE(DESTINATION)
01 KEY=....... 02 KEY=....... 03 KEY=....... 04 KEY=.......
05 KEY=....... 06 KEY=....... 07 KEY=....... 08 KEY=.......
09 KEY=....... 10 KEY=....... 11 KEY=....... 12 KEY=.......
13 KEY=OUT001 14 KEY=OUT012 15 KEY=OUT003 16 KEY=.......
0=SRC 1=OUT 2=2 3=3 4=4 5=5 6=6 7=7
8=8 9=9 A=A B=B C=C D=D E=E F=F
Ctrl-E:MENU Ctrl-D:RETURN Ctrl-N:DESCRIP.NAME T:TAKE