Sony DVS-A3232 Switch User Manual


 
5-20
ROUTING SWITCHER SYSTEM (E)
5-1. Setting Items of the Primary Station
1993.02.03-22:24(Y.M.D-H:M) READ TIME
CHANGE TO = 1993.02.03-22:24
Ctrl-E:RETURN TO MENUÅ
CALL STATION NUMBER ? 
Ctrl-E:RETURN TO MENU
R: CALL SECONDARY STATION
Purpose
This menu is used to call the menu of the secondary station
connected to the S-BUS of the primary station.
Operating Procedure
1. Select the menu item [R] at the menu screen.
A message will be displayed on the screen.
2. Enter the station number of the secondary station, and
press [Enter]. The display will be changed to the
menu screen of the secondary station.
3. If [Ctrl] _ [D] is pressed, the screen will return to the
menu screen of the primary station.
m
1. If the specified secondary station does not exist on the
S-BUS data link, the following message will be
displayed.
Display: “Station dose not exist”
2. If the specified secondary station is not
available for communication, the following message
will be displayed.
Check at the menu item [F : SET ACTIVE UNIT
NUMBER].
Display: “Disable Station”
Setting Screen
S : SELECT INDICATION COLOR
(Except for BKPF-R70 and HDS-V3232)
Purpose
If this menu is set to “ON”, the screen will show a color
display during the use of the Sony control terminal BAC-
1200.
Setting Procedure
1. Select menu item [S].
2. When [S], [Enter] is pressed, the setting condition
displayed will be switched (“ON” “OFF” ”ON”
...).
n
As wrong characters will be displayed before and after the
menu items when a control terminal except Sony control
terminal BAC-1200 is used, be sure to set to “OFF”.
T : SET CLOCK
Purpose
This menu is used for the setting of the time. The time set
at this menu will be used for recording the time of error
occurrence.
Setting Procedure
1. Select menu item [T].
2. Enter the time using the numerical keys, and press
[Enter] to set it.
The screen will be changed to the menu screen
automatically.
n
If [Ctrl] _ [E] is pressed without pressing [Enter], the
screen will return to the menu screen and the setting
modification becomes invalid.
Example of Setting Screen