Filter
Top Products
5-40
ROUTING SWITCHER SYSTEM (E)
Y : SET DISPLAY MODES (BKS-R3216/R1617/R1618/R3219/R3220/R1621)
Purpose
This menu is used to set the display mode.
The setting contents are as follows.
DISPLAY MODES (BKS-R3216/R3220):
Selects the display type. (when J : NAME STYLE
(DESCRIP.NAME) is selected in the primary station
menu.)
NORMAL = Normal display
2 + 2CHAR =Displays two letters before and after the
name.
4CHAR = Displays four letters from the beginning
of the name.
n
If 2 : 2 + 2CHAR or 3 : 4CHAR is selected when J :
NAME STYLE (Type + Num) is selected in the primary
station menu, the two letters and two numbers of the type
name are displayed.
PANEL FUNCTION (BKS-R1617/R1618/R3219/R1621):
Sets the operation mode of the panel.
NORMAL = Normal selection mode
4 DESTINATION = Destinations can be set for each
block of the source button that
consists of four blocks.
Set each source button and also set
the destination of each block using
the menu item [N : SET PANEL
TABLE].
TALLY GROUP
Selects the tally group.
Setting Procedure
1. Select the menu item [Y].
2. The cursor appears in “DISPLAY MODES = 1”.
Move the cursor to an arbitrary mode and press
[Enter] establishes the input mode.
3. Enter the desired number with the numeric keys.
Press [Enter] to set the number ; the cursor moves to
the next setting item.
If you do not want to change the default value, press
[Enter] without entering any number.
4. To set “TALLY GROUP”, move the cursor to the
position of the desired tally (in the case of tally 2,
second “_” from the left) and press [Enter]. The item
is toggled on and off every time [Enter] is pressed.
(When the number is displayed, the item is ON. When
“_” is displayed, the item is OFF.)
Example of Setting Screen
SONY ROUTING SYSTEM SETUP MENU BKS-R3220 V1.03Å STATION NUMBER 2
SET DISPLAY MODES
DISPLAY MODES = 1 1:NORMAL 2:2+2CHAR 3:4CHAR *:UNRELATED
PANEL FUNCTION = * 1:NORMAL 2:4 DESTINATION *:UNRELATED
TALLY GROUP = 1---
Ctrl-E:MENU Ctrl-D:RETURN
5-2. Setting Items of the Secondary Station