Sony DVS-A3232 Switch User Manual


 
4-24
ROUTING SWITCHER SYSTEM (E)
4-5. Flowchart of Setup
Initial Setting
DVS-V3232/FV6464B : Set S3 to "D" (Default) position on the CPU-149 board, then return
S3 to "0" position.
HDS-V3232 : Set S2 to "D" (Default) position on the CPU-251 board, then return
S2 to "0" position.
K: RESET TO DEFAULT TABLE
U: SELECT CONTROL MODE
P: CHANGE PASSWORD
T: SET CLOCK
V: SELECT WARNING DISPLAY
B: SET SOURCE/DEST TYPE
J: NAME STYLE
C: SET DESTINATION NAME
D: SET SOURCE NAME
E: SET LEVEL TABLE
F: SET ACTIVE UNIT NUMBER
L: SET PHYSICAL ASSIGNMENT
H: SET GLOBAL PHANTOM
M: SET INHIBIT TABLE
Modification
N: SET DESCRIPTION NAME GROUP
O: SET TIE LINES
R: CALL SECONDARY STATION
When Description Name
When ' Type + Num ' Name
L: COPY TABLE DATA
Z: SET PANEL STATUS
N: SET PANEL TABLE
O: SET AVAILABLE DESTINATION
H: SET PHANTOM TABLE
K: RESET TO DEFAULT TABLE
U:SELECT REMOTE PROTOCOL
A: SET UNIT LOCATION
G: UPDATE BACKUP CONTROLLER
M: SET MONITOR FUNCTION
End
Secondary Station Setting (Switcher) Secondary Station Setting (Remote Control Unit)
Primary Station Setting
4-5. Flowchart of Setup