Filter
Top Products
5-14
ROUTING SWITCHER SYSTEM (E)
5-1. Setting Items of the Primary Station
N: SET DESCRIPTION NAME GROUP
Purpose
To register the Description names required for each remote
control unit, set the group of Description names. Up to
eight such source and destination groups can be set.
(Up to 160 names can be registered for one group.)
The top half of the screen is for setting the group and the
bottom half displays the list of Description names.
Setting Procedure
1. Select menu item [N].
2. Move the cursor to the group number by pressing [B].
3. Enter the group number using the numerical keys, and
press [Enter] to set it.
4. Press [F1] to move the cursor to the lower side of
screen.
5. Select a number and press [Enter]. The Description
name will be copied to the space of the lowest number
on the group setting screen.
To erase the Description names on the group setting
screen, move the cursor to the number and press [BS],
[DEL] or [Ctrl] _ [P].
Example of Setting Screen
m
1. In the remote control unit, the transferred data are all
displayed as input/output numbers.
This is because data is transferred using input/output
numbers instead of input/output names.
2. The group data of the primary and secondary stations’
must be always the same.
If the primary station data is changed after transfer, be
sure to transfer the new data to the secondary station.
Operating Function Keys
[F1] : MOVE
(To move the cursor up and down between the
group setting screen and Description name list)
[F2] : JUMP (To move the cursor to the desired element
number)
1. When [F2] is pressed, “Please Input ELE-
MENT NUMBER =” will be displayed.
2. Input the element number to be retrieved.
3. When [Enter] is pressed, the cursor will move
to the desired number.
[F3] : SOURCE (DEST.)
When [F3] is pressed, the Description name list
will be changed from destination to source.
[B] : GROUP
Press [B] to move the cursor to the group number
on the group setting screen.
[L] : COPY (To copy all data in the Description name
group to other groups)
1. When [L] is pressed, the message “Please Input
Original Group Number =” will be displayed
to ask for the group number to be copied.
2. Input the group number to be copied with the
numerical keys and press [Enter]. The data of
all group will be copied to the group setting
screen currently displayed.
[S] : SEND (Transfers all data on the group setting
screen currently displayed to a secondary station)
1. When [S] is pressed, a message “Please Input
Station Number =” will be displayed to ask for
the number of a secondary station to which the
data is to be transferred.
2. Input the number of the secondary station using
the numerical keys and press [Enter].
All data on the group setting screen currently
displayed will be transferred to the secondary
station.
DESCRIPTION NAME GROUP DVS-V6464B V2.10 STATION NUMBER 1
GROUP 1 160 REMAIN
001 ....... 002 .......
003 ....... 004 .......
005 ....... 006 .......
007 ....... 008 .......
009 ....... 010 .......
011 ....... 012 .......
013 ....... 014 ......
015 ....... 016 .......
==================================================================
001=OUT001 OUT001 002=OUT002 OUT002
003=OUT003 OUT003 004=OUT004 OUT004
005=OUT005 OUT005 006=OUT006 OUT006
007=OUT007 OUT007 008=OUT008 OUT008
009=OUT009 OUT009 010=OUT010 OUT010
011=OUT011 OUT011 012=OUT012 OUT012
013=OUT013 OUT013 014=OUT014 OUT014
015=OUT015 OUT015 016=OUT016 OUT016
F1:MOVE F2:JUMP
F3:SOURCE
B:Group L:Copy S:Send Ctrl-E:RETURN TO MENU