Sony DVS-A3232 Switch User Manual


 
7-2
ROUTING SWITCHER SYSTEM (E)
7-2. Changed Menu (Primary Station Setting Items)
7-2. Changed Menu (Primary Station Setting Items)
n
The menu screen shown below is based on the DVS-128.
Initial screen (DVS-128/HDS-X3000 Series)
When the [Ctrl] _ [X] key is pressed after the main power is turned on, the following display appears.
Example of Initial Screen
Changed item
. [K: RESET TO DEFAULT TABLE] is deleted from the primary station screen and is moved to the
secondary station screen.
When [K: RESET TO DEFAULT TABLE] is executed on the secondary station screen, the partial
initialization is executed in the S-P1, but is changed so that all data including the works is reset to the
default data when shipped from the factory.
. [S: SET SOURCE ASSIGNMENT] is newly added.
. The [Ctrl] _ [B] key is added as the key input to return to the initial menu (the screen when the main
power is turned on.) The [Ctrl] _ [B] key has the same function as the [Ctrl] _ [X].
SONY ROUTING SYSTEM SETUP MENU DVS-128 V1.00 STATION NUMBER 1
MODIFICATION COMMAND
A: DISPLAY CONTROL AREA B: SET SOURCE/DEST TYPE
C: SET DESTINATION NAME D: SET SOURCE NAME
E: SET LEVEL TABLE F: SET ACTIVE UNIT NUMBER
G: UPDATE BACKUP CONTROLLER H: SET GLOBAL PHANTOM
J: NAME STYLE(Type + Num) L: SET PHYSICAL ASSIGNMENT 
M: SET INHIBIT TABLE N: SET DESCRIPTION NAME GROUP 
O: SET TIE LINES Q: CHANGE CROSSPOINT
R: CALL SECONDARY STATION S: SET SOURCE ASSIGNMENT
MAINTENANCE COMMAND
P: CHANGE PASSWORD T: SET CLOCK
U: SELECT CONTROL MODE W: SYSTEM STATUS LOG 
X: DISPLAY S-BUS COMMUNICATION Z: SET UNIT DETECTABLE
Ctrl-X/B:QUIT SETUP MENU