Sony DVS-A3232 Switch User Manual


 
5-23
ROUTING SWITCHER SYSTEM (E)
5-1. Setting Items of the Primary Station
SYSTEM STATUS LOG DVS-V6464B V2.10 STATION NUMBER 1
1990.10.12-15:42 S-BUS LINK DISCONNECTED
1990.10.27-09:28 STARTED BY BKS-R1601 Ver3.10 IN STATION 11
1990.11.03-05:31 STARTED BY BKS-R3204 Ver3.11 IN STATION 32
1991.01.14-13:51 MISSING REFERENCE SIGNAL IN STATION 1
1991.02.01-11:15 POWER SUPPLY UNIT B DOWN IN STATION 4
1991.02.04-06:11 X-POINT ERROR IN STATION 1
-- end --
Ctrl-E:RETURN TO MENU
S-BUS COMMUNICATION TRACE ON
STATION No.011 01 01 0B 03 0E 00 08
STATION No.015 01 09 0F 03 0E 00 08
STATION No.011 01 01 0A FF 01 00 01
STATION No.011 01 01 0F FF 01 00 01
TRACE OFF
Ctrl-E:RETURN TO MENU
W:SYSTEM STATUS LOG
Purpose
This menu is used to check the error during self-diagnosis
of each station, the status of the S-BUS circuit, and the
time of events.
Example of Display
Operation Procedure
1. Select menu item [W].
2. When all status cannot be displayed on the screen,
_ _ more _ _ ” will be displayed at the bottom of
the screen. Press [SPACE] key to display the next
status. When all status have been displayed, “_ _ end
_ _” will be displayed.
3. Press [Ctrl] _ [E] to return to the menu screen.
System Status Screen
Refer to “6. Confirmation of Function” for detail of the
system status screen.
n
. To erase the LOG contents in DVS-V3232B/V6464B,
set the S3 switch on the CPU-149 board to “C” (Clear)
and then press the S5 switch (Reset).
After erasing, be sure to return the S3 switch to “0” and
press the S5 switch (Reset) again.
. To erase the LOG contents in HDS-V3232, set the S2
switch on the CPU-251 board to “C” (Clear) and then
press the S8 switch (Reset).
After erasing, be sure to return the S2 switch to “0” and
press the S8 switch (Reset) again.
X : DISPLAY S-BUS COMMUNICATION
Purpose
This menu is used to display the S-BUS data received at
the primary station.
Setting Procedure
1. Select menu item [X].
2. To stop the scroll, press [Ctrl] _ [E]. (“TRACE
OFF” will be displayed at the bottom of the screen.)
3. The menu screen will be returned when [Ctrl] _ [E] is
pressed again.
Example of Display
n
For details on the contents of the display, refer to the S-
BUS Protocol Manual.