Filter
Top Products
22 Create a GPRS, HSCSD or CSD Connection
HSCSD or CSD Connection
9. Select CSD/HSCSD. Select your service provider from the Choose Network drop down list.
If your service provider isn’t listed selected <Other>. Click Next.
10.If you selected a Network Operator from the Choose Network drop down list, the telephone
number screen should be automatically filled in.
If you selected <Other> from the Choose Network drop down list; enter the number you need
to dial to connect to your Network Operator in the Telephone Number field; include your
country and area code. Ensure Use Area Code and Country Code is de-selected.
Note:
Contact your Network Operator for a telephone number if necessary.
11. Click Advanced.... To create a HSCSD connection you must specify your preferred network
connection speed from the drop down list and the method you want to use to connect to the
network, on the Speed tab of the Advanced dialog. Click Next.
Note:
If you are unsure which speed to choose from the Speed tab, start with Analogue 9600, and
check to see if it works. Once your connection works on Analog, you can try the V110/V120
settings to see if faster speeds are available. V110/V120 also connects faster than analog.
When roaming you may need to repeat this procedure to adapt your settings to the capability
of the local network operator.
12.Select the Options tab in the Advanced dialog to specify a
callback number, if required. Callback is a service that allows the
call direction to be reversed. If you want to watch the progress
of a callback in a terminal window click the Show Terminal
Window After Dialing box.
See Appendix A - GSM Connection Parameters on page 74,
for descriptions of the updateable parameters in the Advanced dialog. Click Apply to save any
changes before closing the dialog.
13.If you need a User ID and Password to logon to your service provider enter them into the
specific fields. If you don’t need a username and password leave the fields blank. Click Next.