Filter
Top Products
Appendix D- Initiating a HSCSD Connection from Outside the GC79 Manager 79
Appendix D- Initiating a HSCSD Connection from
Outside the GC79 Manager
The HSCSD speed is normally entered in the GC79 Manager Connection Wizard. The specified
speed is requested when the Connect button is pressed in the Status screen of the GC79 Manager.
In exceptional cases you may need to initiate an HSCSD call from outside the GC79 Manager
(for example, Safe Removal of the GC79 on page 20 and Connection on page 36) the HSCSD
speed must be specified by placing additional commands in the GC79 Wireless Modem properties.
Note:
GC79 Wireless Modem properties settings will override any settings for connections initiated
from the GC79 Manager.
1. To access the GC79 Wireless Modem properties, select Start Settings Control Panel
Phone and Modem Options.
2. Select the Modems tab.
3. Select the Sony Ericsson GC79 Wireless Modem and click Properties.
4. Click the Advanced tab and enter the HSCSD setting into the Extra initialization
commands: field.
5. To set the connection to analog 28.8 place +CBST=7,0,1;+CHSN=4,0,0,12 in this field,
Click OK.