Open as PDF
Sony VAIO Desktop User Guide
Connecting peripheral devices
Connecting a projector
You can connect a projector (such as the Sony LCD projector) directly to your computer.
To connect a projector to your VAIO desktop, proceed as follows:
1 Plug one end of the VGA cable (not supplied) into the VGA connector on the back of your computer, and
the other end into the projector you want to use (1).
2 Plug the audio cable (not supplied) into the headphones connector identified by the symbol (2).
3 Connect the power cord of the projector into an AC outlet (3).
✍ This illustration may not correspond to the configuration of your model. Please check the section Back Panel of your printed Specifications sheet
to see where the ports are exactly.