Filter
Top Products
VAIO MicroTower User Guide
58
Installing an Internal Hard Disk Drive
Your VAIO MicroTower comes with an available bay to hold an
additional hard disk drive. The drive you install must not require front
panel access. The hard disk drive access light blinks when either internal
drive is active.
1
Configure the jumpers on the new drive as a secondary master (see
your drive’s documentation for configuration instructions).
2
Remove the left-side panel, as described on page 63.
3
Remove the front panel, as described on page 65.
4
Remove the bottom panel, as described on page 64.
5
Lay the system on its right side (left side faces up–see diagram that
follows).
6
Remove the two screws that secure the drive holder.
!
Before opening the system unit, save any open files, exit Windows, turn off
the power of the computer and all attached peripherals, and then unplug the
power cord.