Sony UP-51MDU Printer User Manual


 
10
Operation
1 Open the front panel by pulling the front panel top toward you.
2 Remove the ink ribbon cartridge by pressing the EJECT button.
The ink ribbon cartridge pops out.
When you use the printer for the first time, this operation is not required.
Note
Never put your hand into the ink ribbon compartment. The thermal head
becomes very hot. You may burn yourself if you touch it.
When the ink ribbon cartridge cannot be ejected
Turn the power off, then back on again. Then, after a while, press the EJECT
button.
Note
Turning off the power will cause the image stored in the memory to be lost. In
this case, capture the image again before printing.
3 Detach the spent ink ribbon from the ink ribbon holder.
1 Remove the spool
holding the ink ribbon.
2 Remove the other spool.
Before Printing (Continued)