Sony UP-51MDU Printer User Manual


 
69
Operation
R
OF / o n
BN REMA I N :
RBN REMAIN OFF/ON:
F
To display characters on the video monitor
Select ON.
To perform the setting for the monitor display on the menu
You can also set whether characters are displayed on the video monitor by
changing DISPLAY to ON or OFF in the OUTPUT SETUP menu. The setting of
the DISPLAY button also changes according to the setting of DISPLAY in the
OUTPUT SETUP menu, and vice versa.
When you want to see an image that is hedden below a menu
You can erase the menu temporarily while holding the DISPLAY button down.
Note
The error messages are always displayed regardless of the setting of the monitor
display.
Displaying the Type and Remaining Amount of the Ink
Ribbon
You can always display the type of the ink ribbon and its remaining amount on the
video monitor.
1 Press the RIBBON REMAIN button.
The current setting appears. The video monitor screen is reset to the regular
screen after a few seconds.
1,2
The currently selected setting is lit in green.
The currently selected setting is displayed in
capital letters.
Continue to the next page c