Filter
Top Products
15
Operation
3 Select the desired input signal.
Press the INPUT SELECT button repeatedly until the color of the desired input
signal turns green on the monitor or until the desired input signal is spelled out
on the printer window display.
Each time you press the INPUT SELECT button, the input signal changes in
the order of VIDEO c S-VIDEO c RGB c VIDEO....
The selected signal will disappear within about three seconds.
Source signal of the image to be printed
Signal from video equipment connected to
the VIDEO INPUT connector
Signal from video equipment connected to
the S-VIDEO INPUT connector
Signal from video equipment connected to
the RGB/SYNC INPUT connectors
To confirm the currently selected input signal
Press the INPUT SELECT button. The currently selected input signal appears in
green on the video monitor and is spelled out in the printer window display for
about 3 seconds.
Note
If you press the INPUT SELECT button when the memory image (the image stored
in memory) is displayed, the memory image will be replaced with the source image
(the image sent from the source equipment).
Video monitor and printer window
display (the selected input signal is
spelled out)
V c VIDEO
SV c S VIDEO
R c RGB