Sony UP-51MDU Printer User Manual


 
20
Operation
When you want to see an image that is hidden below a screen
message
You can erase the screen message (such as Q1, A and so on) from the video
monitor screen by pressing the DISPLAY button. The screen message disappears.
To display a screen message, press the DISPLAY button again. (See Erasing the
Screen Display on the Video Monitor on page 68.) You can also erase the
information about ink ribbon and paper by pressing the RIBBON REMAIN button.
(See Displaying the Type and Remaining Amount of the Ink Ribbon on page 69.)
If a black line appears on the printout
Sometimes, a black line appears on the printout, although it does not appear on the
video monitor. This black line can be eliminated from the printout. (See Changing
the Printout Size/Printout Area page 94.)
If the color quality of printouts is not satisfactory
You can obtain the satisfactory color quality of printout by compensating for the
input signal and/or adjust the color quality of the printouts. (See Compensating for
the Input Signals on page 78, and Adjusting the Printout Coloron page 86.)
Notes
When storing your printouts:
Avoid storing the printout in a location subject to high temperatures, high
humidity, excessive dust or direct sunlight.
Do not stick tape on a printout. Also, avoid leaving a plastic eraser on a printout
or placing a printout in contact with materials which contain plasticizer (under a
desk mat, for example).
Do not allow alcohol or other volatile organic solvents to come into contact with
the printouts.
Making Full-Size Image Printouts (Continued)