Filter
Top Products
89
Installation and Adjustment
COLOR ADJUST COLOR : 200
/ COL / LAY / PRN / IN / OUT /
LOAD COLOR : 1 / 2 / 3 TEMP
: 1 / 2 / 3 [EXEC]
MAG – GRN : 0
YEL – BLU : 0
DARK
LIGHT
SHARPNESS
INTERPOL.
SAVE COLOR
CYN – RED : 0
Q1 A 1
S
: 0
: 0
: 8
: OFF / ON
L
IGHT : 0
D
ARK : 0
When adjusting DARK/LIGHT (contrast)
Adjustment item When you want to
DARK Adjust the dark area of an image.
LIGHT Adjust the light area of an image.
When adjusting the sharpness
SHARPNESS
You can set the sharpness to any of 15 steps from 1 to 15. A setting of step 8
corresponds to the standard sharpness (default setting).
When you want to Content of settings
Make a soft outline. To the left (toward step 1)
Make a normal outline. Centered (step 8)
Make a sharp outline. To the right (toward step 15)
The contrast in the dark area or light area is increased in the + direction
by pressing the g button.
The contrast in the dark area or light area is weakened in the – direction
by pressing the G button.
The number and the corresponding sharpness increase every
time you press the g button.
The number and the corresponding sharpness decrease
every time you press the G button.
COLOR ADJUST COLOR : 200
/ COL / LAY / PRN / IN / OUT /
LOAD COLOR : 1 / 2 / 3 TEMP
: 1 / 2 / 3 [EXEC]
MAG – GRN : 0
YEL – BLU : 0
DARK
LIGHT
SHARPNESS
INTERPOL.
SAVE COLOR
CYN – RED : 0
Q1 A 1
S
: 0
: 0
: 8
: OFF / ON
S
HARPNESS : 8
Continue to the next page c