Sony UP-51MDU Printer User Manual


 
21
Operation
L
1/–/–
[
EXEC
]
OAD USER
LOAD USER 1 / 2 / 3
[
EXEC
]
:
Making Printouts with the Desired User Set Number
You can register all the printer settings as a user settings. The printer allows you to
register three sets of settings as User Set 1, 2 and 3. (See Registering a User Set
on page 116.) By selecting a desired user set number, the printer functions
according to the corresponding settings. You can change a part of the selected user
settings and make printouts.
Note
If you change the currently selected user set to another one, the image stored in
memory pages will be cleared.
1 Turn on the video monitor and printer.
2 Start the video source to display the source image on the video monitor.
This operation is done using the controls of the video equipment acting as the
source.
3 Press the LOAD USER button.
The currently selected user setting appears.
The currently selected user set number
is lit in green.
SOURCE/
MEMORY
MEMORY
PAGE
CAPTURE
PRINT
PRINTALARM
POWER
1
6
3,4
7
5
The currently selected user set
number is displayed.
Continue to the next page c