2
Delta User’s Manual
what they do. (For directions on how to set up Delta, see Appen-
dix A.)
Printer cover
Roll paper holder
/
guide
-
‘igure l-l. For instructions on attaching the various components, see Appendix A.
Printer cover - protects ribbon and print head from dust and
dirt - and also reduces the sound level.
Paper separator and paper guide - used with roll paper and
sprocket-feed paper.
Roll paper holder and holder shaft - used only with roll
paper.
--
Tractor unit - feeds sprocket-feed paper with its drive gear
and sprocket units.
Platen - this is the rubber cylinder that carries paper to the
print head.
Now let’s take a tour around the controls. You’ll find that all of
the operating controls are on the right side of the printer.
On/off power switch - towards the backside. This turns on
the electricity to your machine.
Platen knob - middle, right side. Lets you manually turn the
platen, just like a typewriter.
CAUTION: Turn this knob only with power switch ofi. Turn-
ing it with the power on could damage the platen drive gears.
-
-.