Filter
Top Products
OTHER PRINTER CONTROL COMMANDS
Set MSB to 1
Mode ASCII Decimal Hexadecimal
std. <ESC> “>” 27 62
IB 3E
Setsthemostsignificantbitof eachsubsequentbytereceivedto 1,
allowinguserswitha7-bitinterfaceto accesscharacterswithASCII
codesgreaterthan 127.
Set MSB to O
Mode
ASCII Decimal Hexadecimal
std. <ESC> “=” 27 61
IB 3D
Sets the
mostsignificantbitof eachsubsequentbytereceivedto O.
Accept MSBas is
Mode
ASCII Decimal Hexadecimal
std.
<ESC> “#” 27 35
IB 23
Cancelstheprecedingcommandsandacceptsthemostsignificant
bit as it is sentto theprinter.
Deletelast charactersent
Mode
ASCII Decimal Hexadecimal
std. <DEb
127
7F
Deletesthe last characterreceived.Ignored if the last character
receivedhas alreadybeenprinted,or if the lastcharacterreceived
was all or part of a command.
Cancellast line
Mode ASCII Decimal
Hexadecimal
Both
<CAN> 24 18
Deletesthelast linecurrentlypresentin theprintbuffer.
65