Filter
Top Products
Press RETURN and the Edit Global Sequences screen will be
displayed. These codes control the print functions for form
feed, line feed, margin settings and automatic justification. We
do not recommend that you edit any of these codes.
Press RETURN and the Edit Pitch Table screen will be
displayed. On this screen, you will enter the ASCII decimal
values to define the print pitches. The first two fields in each
line define the pitch range (which in this case are both the same
number). They should be assigned as follows:
10 = Pica 1 = Letter Quality On
12 = Elite
2 = Letter Quality Off
17 = Condensed Pica 3 = Master Reset Code
On this screen, the column labeled “Sequence” is used to
define the print functions in their ASCII decimal values. For
these print pitches, we will use a combination of codes to turn
letter quality on and off and to choose the function code for each
pitch. (For more details on function codes, please refer to Appen-
dix D.)
Follow the sample and enter the (italic) codes for lines 17 - 22.
17. [lo ]
[lo 1
18. [U]
112 1
19. [17]
[I7 1
20. [l ]
Cl 1
21. [2 ]
[2 1
22. [3 ]
[3 1
23. [120]
El201
24. [120]
11203
25. [120-j
[1201
26. [120-j
El201
[ 18 27 80 1
[ 18 27 77
[ 15 3
[ 27 120 1
[ 27 120 0 1'
[ 27 64
[ z
r[ 3
E 1
The codes 120 in lines 23 through 26 can be changed to reflect
more pitch settings. We recommend that until you are more
familiar with using special function codes, you use just the six
we have defined.
When you have finished, press RETURN. You will be