Filter
Top Products
key, press the QUALITY key once again to make your choice,
and press the ON LINE key again.
To select the Type Style Panel mode, press the TYPE
STYLE key while turning on the power. To change the
character set to another, press the ON LINE key, select the
desired type, and press the ON LINE key again. The Type Style
Panel mode is now set to the character set of your choice.
More than one attribute may be set in this way. For example,
if you wish to set both print pitch and print quality, press both
the PRINT PITCH and QUALITY keys when turning on the
power, and after the ON LINE indicator glows, make further
selections as necessary.
If you wish to set all three panel modes, you can use the TOP
OF FORM key instead of using the three keys.
ADVANCED PANEL FUNCTIONS
The printer has the capability to do some basic formatting
from the control panel, as well as move the platen by precise
amounts. The following formatting and platen movements may
be performed from the control panel.
Key
Functions
On Line & Paper Feed
Forward micro-feed
On Line & Top Of Form
Reverse micro-feed
Print Pitch & Top Of Form
Top of form setting
Quality & Top Of Form
Setting of left margin
Quality & Paper Feed
Setting of right margin
On Line & Type Style
Clear the print buffer
-
n Setting print start position
When you want to align the print start position, you can set it
by the micro-feed operation with the control panel, instead of
turning the platen knob manually.
-
1. Set the Off Line mode by pressing the On Line key.
2. While holding down the On Line key, press one of the
following keys.
Paper Feed key - Forward micro-feed
Top Of Form key - Reverse micro-feed
-.
-