Filter
Top Products
90
The following program shows how these codes works.
127);
lo LPRINT "BACKSPACE DOES NOT";
20 LPRINT CHR$(8);CHR$(8);CHR$(8);
30 LPRINT u=== WORK"
40 LPRINT "DELETE DOES NOT";
50 LPRINT CJJR$(127);CHR$(127);CHRs(
60 LPRINT "WORK"
70 LPRINT "CANCEL LINE";
80 LPRINT CHRS(24);
90 LPRINT "DOES NOT WORK"
Here is what this program will print:
BACKSPACE DOES WQ? WORK
DELETE DOES WORK
DOES NOT WORK
The backspace codes in line 20 move the print head a total of
three spaces to the left so that the first part of line 30 will over-
print the word “NOT”. The delete codes in line 50 “erase” the
three letters in the word “NOT” so that it doesn’t even print.
In line 80, CHR$(24) deletes the words in line 70. The
semicolon at the end of line 70 prevents a line feed from causing
that line to print before the printer receives the CHR$(24) code.
The text in line 90 prints as it normally would because it is after
CHR$(24).
n Printing zeroes
There are two types of zeroes. There is the one we use every
day - 0 - and this is what your printer will print as its default.
The other type is used almost exclusively in computers and
engineering. It is called the “slash zero” and is written like this
- 8. The line through the number prevents you from
misreading it as the letter “0”.
n Immediate-print
This printer can print at the quick rate of 180 characters per
second with draft characters. But it will also print more slowly