Filter
Top Products
47
CHAPTER
4
Configuration Settings
This chapter contains the following sections:
■ “Verifying Configuration Settings” on page 47
■ “To Clear the Lock File” on page 50
For a complete listing of SUNWsecfg Error Messages and recommended action, refer
to Appendix B.
Verifying Configuration Settings
During the course of troubleshooting, you might need to verify configuration
settings on the various components in the Sun StorEdge 3900 or 6900 series.
▼ To Verify Configuration Settings
● Run one of the following scripts:
■ Use the /opt/SUNWsecfg/runsecfg script and select the various Verify menu
selections.
■ Run the /opt/SUNWsecfg/bin/checkdefaultconfig script to check all
accessible components. The output is shown in
CODE EXAMPLE 4-1.
■ Run the checkswitch | checkt3config | checkve | checkvemap scripts
manually from /opt/SUNwsecfg/bin.
The scripts listed above check the default configuration files in the /opt/
SUNWsecfg/etc directory and compare the current, live settings to those of the
defaults. Any differences are marked with a FAIL.