Filter
Top Products
Chapter 5 Troubleshooting Host Devices 55
For Internal Use Only
TABLE 5-1 lists all the host events in the Storage Automated Diagnostic Environment.
TABLE 5-1 Storage Automated Diagnostic Environment Event Grid for the Host
Category Component EventType Sev Action Description Information
host hba Alarm+ Yellow [ Info ] status of hba
/devices/
sbus@9,0/
SUNW,qlc@0,30000
/fp@0,0:devctl
on
diag.xxxxx.xxx.com
changed from NOT
CONNECTED to
CONNECTED
Monitors changes in
the output of the
luxadm -e port.
host hba Alarm- Red Y [
Info ] status of hba
/devices/
sbus@9,0/
SUNW,qlc@0,30000
/fp@0,0:devctl
on
diag.xxxxx.xxx.com
changed from
CONNECTED to
NOT CONNECTED
• Monitors changes
in the output of the
luxadm -e port.
• Found path to 20
HBA ports.
host lun.t300 Alarm- Red Y [
Info ] The state of
lun.T300.c14t500
20F2300003EE5d0s
2.statusA on
diag.xxxxx.xxx.com
changed from OK to
ERROR
(target=t3:diag244-
t3b0/90.0.0.40)
luxadm display
reported achange in
the port status of
one of its paths. The
Storage Automated
Diagnostic
Environment then
tries to find to
which enclosure this
path corresponds by
reviewing its
database of Sun
StorEdge T3+ arrays
and virtualization
engines.