Filter
Top Products
E.5
E
7
From the Ports tab, click Add Port.
8
Select Local port and click New Port.
9
Fill in the Enter a port name field, enter the shared name.
10
Click OK and click Close.
11
For Windows NT 4.0, click OK.
For Windows 2000/XP, click Apply and click OK.
Setting Up a Network-Connected
Printer
To use as your network printer, you have to set up the desired
network protocols on the printer. Setting protocols can be
accomplished by using the supplied network program. Please
refer to SyncThru User’s Guide.
You can configure the basic network parameters through the
printer’s control panel. Use the printer control panel to do the
following:
• Print a Network Configuration Page
• Enable or disable network protocols ( AppleTalk, IPX/SPX)
• Configure TCP/IP
• Configure IPX frame types