Tally Genicom T9220 Printer User Manual


 
U
SING
P
RINT
M
ATERIALS
4.23
4
1
Open the Multi-Purpose Tray and the rear output tray.
2
Load print material with print side up and short edge first.
Adjust the guide to fit the width of the material stack.
3 When you print, configure the paper source, type and size
properly in the software application. For details, see
page 5.7.
N
OTE
:
If the size of your print material is not listed in the
Size
box in the
Paper
tab of the printer driver properties, click the Add
Custom button and set the size manually. See page 5.7.
C
AUTION
:
When using the smallest size paper it may be
necessary to use heavier media than normal
For details about setting on the control panel, see page
page 3.5.
4 After printing, close the Multi-Purpose Tray and the rear
output tray.