Tally Genicom T9220 Printer User Manual


 
E.8
Configuring TCP/IP
Your printer can be set up on a variety of TCP/IP networks. There
are several ways in which your printer can be assigned a TCP/IP
address, depending on your network.
• Static Addressing: TCP/IP address is assigned manually by
the network administrator.
• Dynamic Addressing BOOTP/DHCP(default): TCP/IP address
is assigned automatically by the server.
Static Addressing
To enter the TCP/IP address from your printer’s control panel,
take the following steps:
1
Press the Menu button ( ) until you see “Network” on the
bottom line of the display. Press the Enter button ( ) to
access the menu.
2
Press the Enter button ( ) when “Config Network”
displays on the bottom line.
3 Press the scroll button ( or ) to display “Yes” and
press the Enter button ( ).
4 Press the Upper Level button ( ), then use the scroll
button ( ).
5 Press the Enter button ( ) when “Config TCP” displays.
6 Press the scroll button ( or ) to display “Yes” and
press the Enter button ( ).
7 Press the Upper Level button ( ), then use the scroll
button ( ).
8 Press the Enter button ( ) when “IP Get Method”
displays.