Filter
Top Products
SECTION 4 : Choosing Adequate Location
10
Areas indicated by the hazardous heat warning label are very hot while the power is turned
on or just after turning off the power.
The temperature of the ribbon cartridges reaches about 30 °C to 35 °C while the printer is running
or right after the power is shut off. On such conditions, the heat cover is at a temperature of about
74 °C to 80 °C. Touching the heat cover or around the cover may burn your skin or injure you.
To cool the printer to 30 °C or below, leave it as it is for about 40 minutes after switching off the
power.
Do not put your fingers or sleeves close to the tray sliding in or out. They can be got in, possibly
causing injuries.
Never switch on power to the P-55 without removing shipping protection materials. Otherwise,
failures may result.
WARNING
WARNING
CAUTION